G5Q-1 DC24

G5Q PCB Power Relay A Miniature Power Relay with 1-pole 10A Switching Capacity • Excellent switching performance for a variety of loads. • Small, yet provides 8-kV impulse withstand voltage (between coil and contacts). • Low coil power consumption (SPST-NO: 200 mW, SPDT: 400 mW) • Coil insulation system: Class F (UL1446). • IEC/EN 60335-1 conformed. (-HA Model) • Reduced power consumption with voltage holding and pulse width modulation (PWM) control (Only for G5Q-@-PW model) RoHS Compliant ■Model Number Legend G 5 Q -@ @ @-@ - @- @ ——— — — — ■Application Examples • Ideal for output applications of control equipment. 1 2 3 4 5 6 4. Classification 1. Number of Poles None : Standard 1 : 1-pole EU : High-capacity 2. Contact Form None : SPDT (1c) A : SPST-NO (1a) 3. Enclosure Rating None : Flux protection 4 : Sealed G 5 Q 5. Market Code None : General purpose HA : Home Appliance according to IEC/EN60335-1 6. Special Requirement None : Not supported PW : Supported 1 G5Q PCB Power Relay ■Ordering Information Terminal Shape Market Code Classification Contact Form Enclosure Rating Model Rated Coil Voltage 5VDC 9VDC 12VDC 24VDC 5VDC 12VDC 24VDC 5VDC 9VDC 12VDC 24VDC 5VDC 9VDC 12VDC 24VDC 5VDC 12VDC 24VDC 5VDC 9VDC 12VDC 24VDC G5Q-1A Flux protection G5Q-1A-PW SPST-NO(1a) Sealed G5Q-1A4 Standard G5Q-1 General purpose Flux protection G5Q-1-PW SPDT(1c) PCB terminals Sealed SPST-NO(1a) High-capacity SPDT(1c) Flux protection Sealed Flux protection Sealed G5Q-14 G5Q-1A-EU G5Q-1A4-EU G5Q-1-EU G5Q-14-EU Standard G5Q-1A-HA-PW SPST-NO(1a) Home Appliance High-capacity Flux protection G5Q-1A-EU-HA G5Q-1-HA Standard G5Q-1-HA-PW SPDT(1c) High-capacity 100 pcs/tray 5VDC 12VDC 24VDC G5Q-1A-HA G 5 Q Minimum Packing Unit G5Q-1-EU-HA 5VDC 12VDC 24VDC 12VDC 24VDC 5VDC 12VDC 24VDC 12VDC 24VDC Note 1. When ordering, add the rated coil voltage to the model number. Example: G5Q-1A DC5 Rated coil voltage Note 2. Contact your OMRON sales representative for tube packing models (40 pcs/tube). ■Ratings ●Coil Contact form Rated voltage Rated current (mA) Coil resistance (Ω) Must operate voltage (V) Must release voltage (V) Max. voltage (V) Power consumption (mW) 5 VDC 40 125 9 VDC 22.2 405 Approx. 200 5% min. SPST-NO (1a) 5 to 34%* Approx. 32* 12 VDC 16.7 720 24 VDC 8.3 2880 190% 75% max. (at 23°C) 5 VDC 80 63 9 VDC 44.4 202 5% min. Approx. 400 SPDT (1c) 5 to 25%* Approx. 36* 12 VDC 33.3 360 24 VDC 16.7 1440 Note 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%. Note 2. The operating characteristics are measured at a coil temperature of 23°C. Note 3. The “Max. voltage” is the maximum voltage that can be applied to the relay coil. * Power consumption with holding voltage are Approx. 32 mW for 1a and Approx. 36 mW for 1c. Please confirm the detail on page 6 Coil Voltage Reduction (holding voltage). ●Contacts Load Item Resistive load SPST-NO (1a) Standard High-capacity Standard Contact type Contact material Single Ag-Alloy (Cd free) Rated load (resistive) 10 A at 125 VAC 3 A at 125 VAC 5 A at 250 VAC 3 A at 250 VAC 5 A at 30 VDC Rated carry current 10 A (NO)/3 A (NC) Max. switching voltage 277 VAC, 30 VDC AC: 10 A (NO)/3 A (NC) Max. switching current DC: 5 A (NO)/3 A (NC) 2 10 A at 250 VAC 3 A at 125 VAC 5 A at 250 VAC 3 A at 250 VAC 5 A at 30 VDC SPDT (1c) 10 A at 125 VAC (NO) 3 A at 125 VAC (NO) 5 A at 250 VAC (NO) 3 A at 250 VAC (NO) 5 A at 30 VDC (NO) 3 A at 125 VAC (NC) 3 A at 250 VAC (NC) 3 A at 30 VDC (NC) High-capacity 10 A at 250 VAC (NO) 3 A at 125 VAC (NO) 5 A at 250 VAC (NO) 3 A at 250 VAC (NO) 5 A at 30 VDC (NO) 3 A at 125 VAC (NC) 3 A at 250 VAC (NC) 3 A at 30 VDC (NC) G5Q PCB Power Relay ■Characteristics Item Classification Standard model Contact resistance *1 100 mΩ max. Operate time 10 ms max. Release time 5 ms max. Insulation resistance *2 Dielectric strength 1,000 MΩ min. Between coil and contacts 4,000 VAC, 50/60 Hz for 1 min Between contacts of the same polarity 1,000 VAC, 50/60 Hz for 1 min Impulse withstand voltage (between coil and contacts) 8 kV (1.2 x 50 μs) Vibration resistance Destruction 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) Malfunction 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) Shock resistance Destruction 1,000 m/s2 Malfunction 100 m/s2 Durability Mechanical 10,000,000 operations (18,000 operations per hour) Electrical • NO 25,000 operations: 10 A at 250 VAC resistive load (operation: ON for 1 sec, OFF for 3 sec) 50,000 operations: 10 A at 125 VAC resistive load (operation: ON for 1 sec, OFF for 3 sec) 200,000 operations: 3 A at 125 VAC resistive load (operation: ON for 1 sec, OFF for 1 sec) 50,000 operations: 5 A at 250 VAC resistive load (operation: ON for 1 sec, OFF for 1 sec) 100,000 operations: 3 A at 250 VAC resistive load (operation: ON for 1 sec, OFF for 1 sec) 100,000 operations: 5 A at 30 VDC resistive load (operation: ON for 1 sec, OFF for 1 sec) • NC 200,000 operations: 3 A at 125 VAC resistive load (operation: ON for 1 sec, OFF for 1 sec) 100,000 operations: 3 A at 250 VAC resistive load (operation: ON for 1 sec, OFF for 1 sec) 100,000 operations: 3 A at 30 VDC resistive load (operation: ON for 1 sec, OFF for 1 sec) Failure rate (P level) (reference *3) 10 mA at 5 VDC Ambient operating temperature -40°C to 105°C (with no icing or condensation) -40°C to 85°C (with no icing or condensation) Ambient operating humidity 5% to 85% Weight Approx. 6.5 g G 5 Q Note. Note. Values in the above table are the initial values at 23°C. *1. The contact resistance is possible with 1 A applied at 5 VDC using a fall-of-potential method. *2. Testing conditions: The insulation resistance was measured with a 500 VDC megohmmeter at the same locations as the dielectric strength was measured. *3. This value was measured at a switching frequency of 120 operations/min. 3 G5Q PCB Power Relay ■Engineering Data ●Maximum Switching Capacity ●Ambient Temperature VS. Maximum Coil Voltage Standard Maximum coil voltage (% of rated) Switching current (A) Standard 100 AC resistive load (NO) 10 DC resistive load (NO) ●Shock Malfunction Y 200 180 X 1,000 160 Z 1,000 140 120 NC NO Contact 300 Contact 100 300 1,000 Z' 80 AC resistive load (NC) 40 1,000 Y' 20 10 100 0 -40 1000 -20 0 20 23 40 100 120 105 Ambient temperature (°C) Switching voltgate (V) 100 Maximum coil voltage (% of rated) Switching current (A) 60 80 High-capacity(-EU) High-capacity(-EU) G 5 Q 1,000 X' 60 DC resistive load (NC) 1 1 1,000 AC resistive load (NO) 10 DC resistive load (NO) 200 180 160 Unit: m/s2 Shock direction Sample: G5Q-14 12 VDC X X' Number of Relays: 5 pcs Y Test conditions: Shock is applied Z in ±X, ±Y, and ±Z directions three Z' times each with and without energizing the Relays to check Y' the number of malfunctions. The energized voltage is 100% of the rated voltage. Requirement: None malfuction 100 m/s2 140 120 100 AC resistive load (NC) 80 60 40 DC resistive load (NC) 1 1 20 10 100 0 -40 1000 -20 0 20 23 40 60 80 100 120 85 Ambient temperature (°C) Switching voltgate (V) Note. The Maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage. ■Dimensions (Unit: mm) G5Q-1A(4)(-EU)(-HA)(-PW) PCB Mounting Holes (Bottom View) Tolerance: ±0.1 mm 10.3MAX (10.0)* 20.3MAX (20.0)* . .1 (1.18) 0 3± dia . 4-1 (1.19) 1 3 5 (No coil polarity) 7.62±0.1 3.4 2 7.62±0.1 15.8MAX (15.5)* 0.4 Terminal Arrangement/ Internal Connections (Bottom View) 0.27 MAX 10.16±0.1 1 0.4 x 0.4 7.62 10.16 * Average value 7.62 G5Q-1(4)(-EU)(-HA)(-PW) PCB Mounting Holes (Bottom View) Tolerance: ±0.1 mm 10.3MAX (10.0)* 20.3MAX (20.0)* . .1 (1.18) 3 -1. ±0 dia Terminal Arrangement/ Internal Connections (Bottom View) 5 (1.19) 15.8MAX (15.5)* 0.4 3.4 0.4 x 0.4 5 0.27 MAX 2.54±0.1 1 5.08±0.1 7.62 10.16 4 1 2 3 7.62±0.1 5.08 2.54 10.16±0.1 * Average value 4 (No coil polarity) G5Q PCB Power Relay ■Approved Standards UL Recognized: (File No. E41515) CSA Certified: (File No. LR31928) Model Contact form Coil ratings Contact ratings 10 A 250 VAC N.O. only (Resistive) 40°C 10 A 30 VDC N.O. only (Resistive) 40°C G5Q-1A(4)(-EU)(-HA)(-PW) G5Q-1(4)(-EU)(-HA)(-PW) SPST-NO (1a) SPDT (1c) 5 to 48 VDC 4 A 120 VAC N.O. only (Resistive) 40°C 3 A 250 VAC N.C. only (Resistive) 40°C 3 A 30 VDC N.C. only (Resistive) 40°C EN/IEC, VDE Number of test operations 6,000 100,000 6,000 (Certified/No.40009467) Model Contact form G5Q-1(4)(-HA)(-PW) G5Q-1A(4)(-HA)(-PW) SPST-NO (1a) SPDT (1c) Contact ratings Number of test operations 10 A making and 0 A breaking, 250 VAC (cosφ=1) 105°C 5 A marking and 3 A breaking, 30 VDC (0 ms) 105°C 10,000 Coil ratings 5 to 48 VDC G5Q-1A(4)-EU(-HA) G5Q-1(4)-EU(-HA) 5 A 250 VAC (cosφ=1) (N.O.) 105°C 75,000 10 A 250 VAC (cosφ=1) (N.O.) 65°C 5 A 30 VDC (0 ms) (N.O.) 65°C 3 A 30 VDC (0 ms) (N.C.) 65°C 10,000 4 A 250 VAC (cosφ=1) (N.O.) 85°C 100,000 Creepage Distance 6.4 mm min. Clearance Distance 5.5 mm min. Insulation Material Group IIIa Type of Insulation Coil-contact Circuit Open Contact Circuit Basic (Rated voltage 400 V) / Reinforced (Rated voltage 250 V) Micro disconnection Rated Insulation Voltage 250 V Pollution Degree 2 Rated Voltage System 250 V / 400 V (EU flux type only) Over Voltage Category III Category of Protection according to IEC 61810-1 RT II (Flux protection) / RT III (Sealed) Glow Wire according to IEC 60335-1 GWT 750°C min. (IEC 60695-2-11) / GWFI 850°C min. (IEC 60695-2-12) Tracking Index of Relay Base PTI 250 V min. (housing parts) Flammability Class according to UL94 V-0 Coil Insulation System F Class (UL 1446) G 5 Q 5 G5Q PCB Power Relay ■Precautions ●Please refer to “PCB Relays Common Precautions” for correct use. Correct Use ●Coil Voltage Reduction (Holding Voltage) after Relay operation • If the coil voltage is reduced to the holding voltage after relay operation, first apply the rated voltage to the coil for at least 100 ms, as shown below. • A voltage of at least 40% (G5Q-1A type) /30% (G5Q-1 type) of the rated voltage is required for the coil holding voltage. Do not allow voltage fluctuations to cause the coil holding voltage to fall below this level. G5Q-1A ●Power consumption reduction of coil with pulse width modulation (PWM) • Models with PWM drive capability (-PW) can reduce coil holding current with PWM control. This function reduces power consumption by reducing the current held by coil. • Apply the rated voltage for at least 100 ms at the time of relay operation. • The following are our verification conditions. When using, it be sure to check the actual machine under the actual usage conditions. ■Example of drive circuit 100% (Rated voltage) 40% (Holding voltage) Applied coil voltage (100%) 100ms min. Surge absorption diode G5Q-1 G 5 Q 100% (Rated voltage) Pulse input Relay Coil MOS-FET ■Conditions of validation carried out by OMRON • Applied voltage: rated voltage • Duty: 50% or more • Frequency: 10 kHz or more • Diode Vf: 0.4 V or less 30% (Holding voltage) 100ms min. G5Q-1A Applied coil voltage Rated voltage 100% Holding voltage 40% * Coil resistance* 125Ω (5 VDC) 720Ω (12 VDC) 2,880Ω (24 VDC) Power consumption Approx. 200 mW Approx. 32 mW The coil resistance were measured at a coil temperature of 23°C with tolerances of ±10%. G5Q-1 Applied coil voltage Rated voltage 100% Holding voltage 30% * Coil resistance* 63Ω (5 VDC) 360Ω (12 VDC) 1,440Ω (24 VDC) Power consumption Approx. 400 mW Approx. 36 mW The coil resistance were measured at a coil temperature of 23°C with tolerances of ±10%. Please check each region's Terms & Conditions by region website. OMRON Corporation Electronic and Mechanical Components Company Regional Contact Americas https://www.components.omron.com/ Asia-Pacific https://ecb.omron.com.sg/ Korea https://www.omron-ecb.co.kr/ Europe http://components.omron.eu/ China https://www.ecb.omron.com.cn/ Japan https://www.omron.co.jp/ecb/ © OMRON Corporation 2007-2021 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. 6 Cat. No. J155-E1-16 0621(0207)